Field Applied Thermoplastics — Ready For Primetime?

Pool interior lined with thermoplastic several years ago. Owners hired CCG to evaluate the condition and cause of rust “staining.” CCG, using wet sponge, low voltage holiday testing and other means concluded the rusting was not surface staining, but holidays allowing water to reach the substrate causing rust-through, not staining.

One of the benefits, and pleasures, of providing highly technical, vendor-neutral corrosion mitigation and optimal material selection consulting, is that we stumble upon new products all of the time.

Magnification of the surface of the original application shows it to be somewhat lumpy in appearance.

Chicago Corrosion Group is fortunate to work in a variety of spaces. In one month, we remediated a failed floor coating system for a switchbox module for a major utility, provided support for passive fire proofing failures at a refinery, consulted on one clarifier, inspected another and just provided a proposal for identifying optimal materials for lining the interior of a 200-ft. tall smoke stack.

But the most technically interesting project I’ve worked on in a very long time was of a simple swimming pool on the top floor of a high-rise in Chicago.

The pool was originally lined with a 100-percent solids epoxy roughly 15 years ago. Last summer, a contractor came in, blasted off all of the coating and applied a field-applied, thermoplastic coating system. The reason we were called in was because the coating system was distressed — exhibiting rust spots through various areas of the coating system.

The problem, we concluded, was applicator error — an easy determination and simple fix. But what was of most interest was that this was the first time I had ever seen a thermosetting material applied in the field. And, had the application been carried out properly, the coating system would have looked pristine.

I have been waiting, and wondering, when thermoplastic materials would be developed for field application. Why? Because the potential is awesome, cool and deeply profound.

Close-up view of holidays and rust-through due to holidays, an effect of inconsistency in the original application.

Thermoplastics, in this case, are those materials which can be melted, applied to a substrate, and then be melted again — think of candle wax.

Why is this upcoming technology so intriguing? Because plastics can last forever — just think about the worldwide problem with plastic water bottles. Those darn suckers are everywhere and take hundreds of years to break down.

1 2 next >>

Posted by on Jul 1st, 2018 and filed under Feature Story. You can follow any responses to this entry through the RSS 2.0. Both comments and pings are currently closed.

Comments are closed